產品名稱：碳化硅/氮化硅高溫燒結爐

Name: Silicon carbide high temperature sintering furnace

主要用于反應燒結碳化硅、氮化硅結合碳化硅的真空燒結行業。被廣泛應用于軍工、衛生及建筑陶瓷、航空航天、冶金、化工、機械、汽車等領域。

碳化硅無壓燒結爐適用于密封環、軸套軸管、噴嘴、葉輪、防彈產品等新興陶瓷的碳化硅無壓燒結工藝。

氮化硅陶瓷材料可用于高溫工程的部件，冶金工業等方面的高級耐火材料，化工工業中抗腐蝕部件和密封部件，機械加工工業的刀具和刃具等

It is mainly used in vacuum sintering industry of reactive sintering silicon carbide and silicon nitride combined with silicon carbide. It is widely used in military industry, health and building ceramics, aerospace, metallurgy, chemical industry, machinery, automobile and other fields. 

Silicon carbide pressure-free sintering furnace is suitable for silicon carbide pressure-free sintering process of sealing ring, shaft sleeve, nozzle, impeller, bulletproof products and so on.

Silicon nitride ceramic materials can be used in high temperature engineering components, advanced refractories in metallurgical industry, corrosion resistant and sealing parts in chemical industry, cutting tools and cutting tools in machining industry, etc.

特點 /characteristic：

1. 高的溫度均勻性和熱效率

High temperature uniformity and thermal efficiency

2. 多區獨立控溫 、真空分壓功能

Multi-zone independent temperature control, vacuum partial pressure function                

3. 主體采用耐高溫材質，滿足細，中 粗顆粒料WC 粉和復合料碳化加熱工藝

The main body adopts high temperature resistant material, which satisfies the carbonation heating process of fine and medium coarse granule WC powder and composite material.

4.采用溫控組合方式

Adopt the combination mode of temperature control。

5. 石墨隔熱屏，石墨加熱加熱元件360度輻射加熱

Graphite heat shield, graphite heating element,360-degree radiant heating。

6.多種冷凝捕集方式減少機組污染

A variety of condensation trapping methods to reduce unit pollution

7.氮氣吹掃系統絕緣更好，脫脂更徹底

Nitrogen purging system has better insulation and more thorough defatting.

8.專利絕緣方式，保證發熱體長期使用

Patented insulation mode to ensure the long-term use of heating body

9.廢氣燃燒與過濾系統達到排放標準

Exhaust gas combustion and filtration system meets emission standard

配置選擇/Configure select:

產品 規格/ Specifications：

注：特殊規格要求可根據客戶要求定制

Note: Special specification requirements can be customized according to customer requirements

以下參數可根據工藝要求調整，不作為驗收依據，具體以技術方案和協議為準

The following parameters may be adjusted according to the process requirements and shall not be used as the basis for acceptance, depending on the technical scheme and agreement